Tail Light Strobe
I have installed strobe lights inside the rear tail light housings for easy, emergency warning system.
The 12 volt + line is hooked to the tail light wire , and the the - neg. wire is
hooked to a 10/32 screw
that protrudes through a drilled hole in the fiber glass adjacent to tail
lights. An additional screw is located
1" away that is hooked to ground. By merely connecting the two screws together
with a conductor , the strobes
are (intentionally) activated. This is a fast sure way to get attention and warn
passer bye's.
I purchased the strobes at PEP Boys for under $15 each. I suggest you
incorporate this unique ,
easy option in your motor home.
John Wolfe